Rough Cut 44 with 10 H.P. Tecumseh Engine Model Number: 30-0015 MSRP: $1265.00 PDF Manual
Rough cut 44 with 10 H.P. Briggs & Stratton Engine Model Number: 30-0020 MSRP: $1410.00 PDF Manual
This mower has a 44" cutting width and come equipped with a 10 HP Tecumseh Engine. It is adjustable to cut anywhere between 2"-6". It will cut down up to 1" saplings. It has a single blade with a Centrifugal Clutch to prevent and damage from occurring if you were to go over a tree stump or rocks. It has a four wheel fully floating deck to reduce the risk of bottoming out on the ground. Constructed of a heavy duty 12 gauge steel, you will be able to mow on any terrain and not have to worry about damaging or denting your deck. You have the option of having this mower follow directly behind you, as well as towing offset to either the left or the right with the pull of a pin.
The versatile Rough Cut Mower will handle your toughest mowing jobs—tall weeds, overgrown brush, even small trees. Pull this sturdy 48” (121.9 cm) mower behind your ATV or anything with a pin hitch. The Rough Cut features an offset hitch that allows you to mow to the left, right or directly behind your ATV. By extending the hitch outward, you can mow close to fences and under trees while keeping your ATV clear from danger or hazards. The Rough Cut is offered with a powerful 13 hp Briggs & Stratton engine
Rough Cut Mower with 13 HP Briggs & Stratton Engine
The Quicksilver® 54 is a finish cut mower that can be mounted on the front of your ATV by using our Front Pivot Assembly, or on the rear by using our Pull Behind Kit. It can be purchased with either an 11 HP Briggs & Stratton engine or an 11 HP Honda engine. The three 18 inch blades give you a smooth, clean cut.
Quicksilver Mower 54 with 11 HP Briggs & Stratton Engine
(Required to mount the Quicksilver 54 to the Front of your ATV.)
The Front Pivot Assembly attaches to the mower and to mounting hardware designed specifically for each ATV model. The Quicksilver 54 electric start and throttle are relocated to the ATV's rack for operator convenience.
Front mounting gives you precise control and also prevents grass compacting since the grass is mowed in front of the ATV tires. The hinge is designed to pivot vertically and horizontally.
In addition to the Front Pivot Assembly, a mounting hardware kit is required to mount the Quicksilver 54 to your ATV. The mounting hardware kits can also be used to mount our Snow Plow system to your ATV. Kawasaki Mule models require a front mount kit instead of a standard mounting hardware kit.
The Pull Behind Kit allows you to pull the Quicksilver Mower behind your ATV. The quick pin hitch is designed to offset the Quicksilver mower to the right, left, or directly behind.
